2021 Caterpillar Skid Steer Loaders 236D3

Selling Price -

$29,500.00

2021 CAT 236D3 SKID STEER 2 SPEED HIGH FLOW EXCELLENT CONDITION. THIS MACHINE IS READY FOR ANY JOB EXCELLENT CONDITION $29500 ??FINANCING AVAILABLE ??110 N HWY 18, Vale, NC 28168 ?? 704-538-5345 WWW.WESTENDSALES.COM

Information

2021 CAT 236D3 SKID STEER
2 SPEED HIGH FLOW
EXCELLENT CONDITION.
THIS MACHINE IS READY FOR ANY JOB
EXCELLENT CONDITION
$29500
??FINANCING AVAILABLE
??110 N HWY 18, Vale, NC 28168
?? 704-538-5345
WWW.WESTENDSALES.COM

Photos

Highlights

  • $29,500.00
  • Vale, North Carolina
  • Pre-Owned
  • UE10135
  • 2021
  • Caterpillar
  • Skid Steer Loaders 236D3
  • Diesel
  • Available
  • Vehicle over Tires: 66 in
  • Top of Cab: 82 in | Bucket Pin - Maximum Lift: 122.9 in | Rack Back Angle - Maximum: 91° | Bucket Pin - Carry Position: 7.5 in
  • CAT0236DJKXL01465

Specifications

  • 2021
  • Caterpillar
  • Skid Steer Loaders
  • 236D3
  • General
  • Cat
  • Model: 3.3B DIT (turbo)
  • Gross - SAE J1995: 74.3 HP | Net - SAE 1349: 73.2 HP | Net Flywheel: 73.2 HP | Net - ISO 9249: 73.9 HP | Hydraulic Flow - Standard - Hydraulic (Calculated): 39 HP | Hydraulic Flow - High Flow - Hydraulic (Calculated): 58 HP
  • Peak - 1,500 rpm - SAE J1995: 195 ft·lbf
  • 3.7 in
  • 4.7 in
  • 203 in³
  • 43.5 in
  • Outside Cab: 101 dB(A) | Inside Cab: 83 dB(A)
  • Travel - Forward or Reverse - Two Speed Option: 10.6 mile/h | Travel - Forward or Reverse - One Speed: 7 mile/h
  • Rated Operating Capacity: 1800 lb | Tipping Load: 3600 lb | Breakout Force - Tilt Cylinder: 5003 lb
  • Standard - Loader Hydraulic Flow: 20 gal/min | High Flow - Maximum Loader Hydraulic Flow: 30 gal/min
  • Hydraulic Flow - High Flow - Maximum Loader: 3335 psi | Hydraulic Flow - Standard - Loader: 3335 psi
  • Departure Angle: 26° | Maximum Dump Angle: 48° | Maximum Reach - With Arms Parallel to Ground: 53.3 in | Clearance at Maximum Lift and Dump: 92.9 in | Reach - Maximum Lift/Dump: 16 in | Bumper Overhang - Behind Rear Axle: 40.2 in
  • from Center - Machine Rear: 64.5 in | from Center - Bucket: 83 in | from Center - Coupler: 51.8 in
  • Top of Cab: 82 in | Bucket Pin - Maximum Lift: 122.9 in | Rack Back Angle - Maximum: 91° | Bucket Pin - Carry Position: 7.5 in
  • Without Bucket: 108.9 in | With Bucket on Ground: 137.3 in
  • Vehicle over Tires: 66 in
  • Maximum: 156.6 in
  • 7.7 in
  • Engine Crankcase: 3 gal (US) | Hydraulic System: 13.2 gal (US) | Hydraulic Tank: 10.3 gal (US)
  • Chain - Each Side: 2.3 gal (US)
  • Tank: 24.8 gal (US)
  • 3.7 gal (US)
  • Operating: 6567 lb
  • CAT0236DJKXL01465