Back

2021 Caterpillar Skid Steer Loaders 236D3

2021 CAT 236D3 SKID STEER 2 SPEED HIGH FLOW EXCELLENT CONDITION. THIS MACHINE IS READY FOR ANY JOB EXCELLENT CONDITION $29500 ??FINANCING AVAILABLE ??110 N HWY 18, Vale, NC 28168 ?? 704-538-5345 WWW.WESTENDSALES.COM
MoreLess
Limited Time Offer!

Selling Price -$29,500.00
No Images Available

Selling Price -

$29,500.00

HD Certified Pre-Owned
2021 CAT 236D3 SKID STEER
2 SPEED HIGH FLOW
EXCELLENT CONDITION.
THIS MACHINE IS READY FOR ANY JOB
EXCELLENT CONDITION
$29500
??FINANCING AVAILABLE
??110 N HWY 18, Vale, NC 28168
?? 704-538-5345
WWW.WESTENDSALES.COM
  • 2021
  • Caterpillar
  • Skid Steer Loaders
  • 236D3
  • General
  • Cat
  • Model: 3.3B DIT (turbo)
  • Gross - SAE J1995: 74.3 HP | Net - SAE 1349: 73.2 HP | Net Flywheel: 73.2 HP | Net - ISO 9249: 73.9 HP | Hydraulic Flow - Standard - Hydraulic (Calculated): 39 HP | Hydraulic Flow - High Flow - Hydraulic (Calculated): 58 HP
  • Peak - 1,500 rpm - SAE J1995: 195 ft·lbf
  • 3.7 in
  • 4.7 in
  • 203 in³
  • 43.5 in
  • Outside Cab: 101 dB(A) | Inside Cab: 83 dB(A)
  • Travel - Forward or Reverse - Two Speed Option: 10.6 mile/h | Travel - Forward or Reverse - One Speed: 7 mile/h
  • Rated Operating Capacity: 1800 lb | Tipping Load: 3600 lb | Breakout Force - Tilt Cylinder: 5003 lb
  • Standard - Loader Hydraulic Flow: 20 gal/min | High Flow - Maximum Loader Hydraulic Flow: 30 gal/min
  • Hydraulic Flow - High Flow - Maximum Loader: 3335 psi | Hydraulic Flow - Standard - Loader: 3335 psi
  • Departure Angle: 26° | Maximum Dump Angle: 48° | Maximum Reach - With Arms Parallel to Ground: 53.3 in | Clearance at Maximum Lift and Dump: 92.9 in | Reach - Maximum Lift/Dump: 16 in | Bumper Overhang - Behind Rear Axle: 40.2 in
  • from Center - Machine Rear: 64.5 in | from Center - Bucket: 83 in | from Center - Coupler: 51.8 in
  • Top of Cab: 82 in | Bucket Pin - Maximum Lift: 122.9 in | Rack Back Angle - Maximum: 91° | Bucket Pin - Carry Position: 7.5 in
  • Without Bucket: 108.9 in | With Bucket on Ground: 137.3 in
  • Vehicle over Tires: 66 in
  • Maximum: 156.6 in
  • 7.7 in
  • Engine Crankcase: 3 gal (US) | Hydraulic System: 13.2 gal (US) | Hydraulic Tank: 10.3 gal (US)
  • Chain - Each Side: 2.3 gal (US)
  • Tank: 24.8 gal (US)
  • 3.7 gal (US)
  • Operating: 6567 lb
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $29,500.00
  • Vale, North Carolina
  • Pre-Owned
  • 2021
  • Caterpillar
  • Skid Steer Loaders 236D3
  • Available
  • Vehicle over Tires: 66 in
  • Top of Cab: 82 in | Bucket Pin - Maximum Lift: 122.9 in | Rack Back Angle - Maximum: 91° | Bucket Pin - Carry Position: 7.5 in

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.